The data is on the type plate, which you can find as shown.
Error code F56 means that your washing machine isn’t reaching the required spin speed. Normally, the spin speed should be at least 450 rpm, but it stays below 400 rpm.
This can have several causes:
Overdosing: If you use too much detergent, it can create excessive foam, which affects the spinning process.
Drainage issues: If the water doesn’t drain properly, the machine can’t reach the needed spin speed.
Faulty drum drive motor (M5): If the motor that drives the drum is faulty, this can also cause the error.
Defective power electronics: If the washing machine’s power electronics are faulty, this can also lead to the error you’re seeing.
Miele
F56
56
To fix error F56, please follow these steps:
Check your detergent dosage and reduce it if necessary to avoid excessive foaming.
Check the water drainage: Make sure the drain hose isn’t kinked or blocked.
Inspect the drum drive motor (M5) for visible damage or loose connections.
If the motor or electronics are faulty, consider getting a refurbished part.
Run a test cycle to see if the problem is fixed.
The data is on the type plate, which you can find as shown.
Are you looking for a technician for a repair? Do you need advice or help with removing and installing spare parts? We will find the right partner for you locally.
